Strip & Seal Brisbane
Old floor polish stripped back and fresh protective coats applied
Sealed vinyl and lino floors in schools, clinics, shops and older homes slowly turn yellow and patchy as polish layers wear and trap dirt. Stripping removes the old coats completely, back to the bare floor. We then apply fresh layers of sealer so the floor looks clean and even and is far easier to maintain day to day.
Key benefits
Yellowed layers gone
Old, discoloured polish is removed rather than coated over.
Even, renewed finish
Fresh coats give a consistent look across the whole floor.
Easier maintenance
A sealed floor releases dirt with routine mopping.
Scheduled around you
Commercial jobs can be done after hours or on weekends.
What's included
- Floor assessment and test strip
- Furniture moved where practical
- Application of stripping solution
- Machine scrub to remove old coats
- Thorough rinse and neutralise
- Multiple coats of sealer applied
- Drying time and aftercare advice
Suitable for
- Vinyl tiles and sheet vinyl
- Linoleum floors
- Schools and childcare centres
- Medical, dental and aged care facilities
- Retail stores and warehouses
Our cleaning process
- 1Prepare
Clear the area and test the floor.
- 2Strip
Stripping solution and machine scrub remove old coats.
- 3Rinse
Floor rinsed and neutralised.
- 4Seal
Fresh sealer applied in several thin coats.
- 5Cure
Floor left to cure before foot traffic.
Keeping it looking good between visits
- Keep traffic off the floor until the sealer has cured
- Use a neutral cleaner — harsh products wear sealer quickly
- Schedule a buff or top-up coat between full strip and seals
- Use entry matting to protect the finish
Drying time
Light foot traffic is usually fine after a few hours; furniture is best returned the next day.
Frequently asked questions
Related services
Book your strip & seal in Brisbane
Tell us the rooms and the surface and we'll come back with a clear scope and the next available slot in your suburb.
Prefer to talk? 0452 565 059